Pectin Resistant Rubber Oring

Description: 1. Compound from world class suppliers, NBR, EPDM, VITON (FKM), HNBR, etc material and pantone code available, hardness from 30 to 95 Shore A. 2. Pressed by mould vulcanization, ID from 0.5mm to 1000mm and C/S from 0.5mm to 20mm by mould Vulcanization, ID from 3mm to 20mm and C/S...

Inquiry

Product Details

About O-rings

O-rings are one of the most common seals used in machine design because they are inexpensive, easy to make, reliable, and have simple mounting requirements.

The O-ring may be used in static applications or in dynamic applications where there is relative motion between the parts and the O-ring. Dynamic examples include rotating pump shafts and hydraulic cylinder pistons.We can provide more than 1000 different sizes at AS568, BS, JIS series and other national standard O rings in Nitrile (NBR), Silicone(MVQ), EPDM, HNBR, FKM (FKM), Neoprene, CR materials and so on.

Hardness range from 25 to 90 Shore A.

We can also supply many other non standard and colours (blue, brown, grey, red, white, yellow, green) o rings as your requirements.

O-ring advantage:

O-rings have the following advantages compared to other types of seals:

-- Suitable for a variety of sealing forms: static seal, dynamic seal

Suitable for a variety of materials, sizes and grooves have been standardized, interchangeable

- Suitable for a variety of sports: rotary motion, axial reciprocating motion or combined motion (such as rotary reciprocating combined motion)

- Suitable for many different sealing media: oil, water, gas, chemical media or other mixed media

Effective sealing of oil, water, air, gas and various chemical media through the selection of suitable rubber materials and appropriate formulation design. The temperature range is wide (-60 ° C ~ +220 ° C), the pressure can be up to 1500Kg / cm2 when used in fixed use (combined with the reinforcing ring).

--Simple design, compact structure, easy to assemble and disassemble

The O-ring cross-section structure is extremely simple, and has a self-sealing effect, and the sealing performance is reliable.

Since the O-ring itself and the mounting structure are extremely simple and standardized, installation and replacement are very easy.

--More varieties of materials

Can be selected according to different fluids: nitrile rubber (NBR), fluororubber (FKM), silicone rubber (VMQ), ethylene propylene rubber (EPDM), neoprene (CR), butyl rubber (BU), poly Tetrafluoroethylene (PTFE), natural rubber (NR), etc.

--low cost

--The dynamic friction resistance is relatively small

Our Services

1. Experienced sealing products supplier.

2. Professional design team and sales department for your service.

3. All the questions will be dealed within 24hours.

4. Stable quality---coming from good materials.

5. Lower price---Not cheapest but the lowest at the same quality.

6. Good service---satisfactory service before and after sale.

7. Delivery time---10days-15days for mass production.

8. Your inquiry will be replied in one working day.

we can also produce Oil Resistant Fluoro silicone Rubber / Heat Resistant Fluoro rubber Part / High Temperature Resistant Fluorine rubber O ring in different sizes according to your requirement .

Our Products